Plastic Fountain Nozzle 1/2, Fountain Head for Garden, Ponds, Tabletop Fish Ponds, Use for Indoor and Outdoor, 9 Components and 5 Different Shapes for Easy Installation, Pool Aerator Nozzle

The Small fountain Nozzle Kit aerates and decorates your pond using your pump and adds oxygen to water for a healthy, thriving aquatic environment. If you've got yourself a beautiful garden or a fish tank, don't miss out on these fountain Nozzle. They come in five different styles: fountain, rainfall, water column, trumpet, and mushroom. They are perfect as fountain accessories for small fish tanks, garden ponds, and water bowls, adding a touch of landscaping to your setup. The nozzle kit includes four fountain nozzles (one of which requires replacing another part to use), eight long pipes, two short pipes, two connector pipes, and one adjustable switch. You can adjust the height according to your needs. It can be directly installed on a water pump with a 1/2 (½) inch outlet, which is a widely used water fountain for outdoor gardens. The spray dimensions of these pond fountain nozzles are as follows: fountain height: 10cm/4 inches, water column height: 60cm/24 inches, rainfall width and height: 50*55cm/20*22 inches, trumpet diameter: 20cm/8 inches, mushroom diameter: 20cm/8 inches. It comes with an adjustable valve to regulate the water flow. (Please note that these are approximate measurements, and the actual effect may vary depending on water pressure. Lower water pressure will result in smaller spray dimensions.) When installing, make sure to use rotational force to connect the components instead of rocking them back and forth. Rocking motions can damage the pipes. If you accidentally cause them to break during installation, you can try wrapping them with transparent adhesive tape as a temporary solution. Generally, with proper installation, they should remain intact. Wishing you success!